American Journal of Neuroradiology 21:1277-1279 (7 2000)
© 2000 American Society of Neuroradiology
ARTICLE
Change of Spontaneous Reaction of Glue and Lipiodol Mixture during Embolization after the Addition of Tungsten Powder: In Vitro Study
a From the Department of Radiology (D.C.S., M.S.L.), Asan Medical Center, University of Ulsan, College of Medicine; the Department of Radiology (H.B.S.), First Affiliated Hospital of Hanjing Medical University; the Department of Medical Engineering (S.S.P.), Seoul Health College; the Department of Radiology (H.Y.C.), College of Medicine Ewha Womans University.
BACKGROUND AND PURPOSE: We have noted that glue-Lipiodol mixtures harden prematurely in the catheter during embolization of brain arteriovenous malformations. However, we observed that hardening of this embolic material does not occur when tungsten powder is added to the glue mixture. In order to clarify the effect of tungsten powder on the glue mixture, we evaluated the reaction time and hardness of the glue mixture in vitro after the addition of tungsten powder. We also measured the pH of the tungsten solution.
METHODS: Six lots of Lipiodol and three lots of Histoacryl Blue were mixed in a 5-cc bottle with a 50% to 25% glue concentration (glue:Lipiodol = 1:1 to 1:3) and this mixture was observed for 2 weeks. The hardness of the polymerized glue mixture was categorized as liquid, gel, semi-solid, or solid. Various series of experiments were performed after the addition of tungsten powder (0.2 g) and blood (a drop) into the glue mixture. We also separately mixed tungsten and tantalum powder in tubes, each with 5 mL of distilled water, and then measured the pH of these three times. The mixed amounts of tungsten and tantalum ranged from 0.1 to 0.5 mg.
RESULTS: In a 50% glue concentration, the glue mixture turned into a solid cast within 48 hours. In a 25% concentration, the glue mixture turned into gel within 24 hours. The casts became solid in the 50% and gelled in the 25% concentration, and solid or gel in 28% and 33% glue mixture concentrations. The addition of tungsten powder to 50% and 25% glue mixture concentrations caused the glue mixtures to remain in a liquid state for 2 weeks regardless of the Lipiodol products used. Measurement of acidity achieved using a pH meter in 5 cc of distilled water with tungsten powder (0.1 to 0.5 g) revealed a change of pH from 3.5 to 2.6 according to the amount of tungsten added. Tantalum revealed weak acidity, with a pH range from 6.4 to 5.7. The addition of blood immediately caused the mixture to become solid in 50% and semi-solid in 25% glue concentrations.
CONCLUSION: The reaction time of the glue mixture differed according to the lot number of the Lipiodol. The addition of tungsten powder appeared to prevent premature cast formation by decreasing the pH with a mechanism similar to that of adding acetic acid.
This article has been cited by other articles:
 |
|
 |
|
  C.W. Ryu, S.M. Whang, D.C. Suh, S.-M. Kim, Y.-J. Jang, H.-J. Kim, M.-J. Kim, S.E. Chang, J.P. Hong, and S.J. Kim Percutaneous Direct Puncture Glue Embolization of High-Flow Craniofacial Arteriovenous Lesions: A New Circular Ring Compression Device with a Beveled Edge AJNR Am. J. Neuroradiol., March 1, 2007; 28(3): 528 - 530. [Abstract] [Full Text] [PDF]
|
|
|
|
 |
|
 S. H. Kim, M. W. Moon, H. J. Lee, J. S. Sim, S. H. Kim, and C. Ahn Renal Cyst Ablation with n-Butyl Cyanoacrylate and Iodized Oil in Symptomatic Patients with Autosomal Dominant Polycystic Kidney Disease: Preliminary Report Radiology, February 1, 2003; 226(2): 573 - 576. [Abstract] [Full Text] [PDF]
|
|
|
|
|
|
M. J. Gounis, B. B. Lieber, A. K. Wakhloo, R. Siekmann, and L.N. Hopkins Effect of Glacial Acetic Acid and Ethiodized Oil Concentration on Embolization with N-Butyl 2-Cyanoacrylate: An in Vivo Investigation AJNR Am. J. Neuroradiol., June 1, 2002; 23(6): 938 - 944. [Abstract] [Full Text] [PDF]
|
|