Advanced

AJNR - American Journal of Neuroradiology

This Article Figures Only Full Text Full Text (PDF) Alert me when this article is cited Alert me if a correction is posted Citation Map Services Similar articles in this journal Alert me to new issues of the journal Download to citation manager Citing Articles Citing Articles via CrossRef Citing Articles via Google Scholar Google Scholar Articles by Whitlow, C.T. Articles by Morris, P.P. Search for Related Content PubMed Articles by Whitlow, C.T. Articles by Morris, P.P.

American Journal of Neuroradiology 28:1036-1041, June-July 2007
DOI 10.3174/ajnr.A0500
© 2007 American Society of Neuroradiology

SPINE

Investigating Sacroplasty: Technical Considerations and Finite Element Analysis of Polymethylmethacrylate Infusion into Cadaveric Sacrum

C.T. Whitlow^a, S.K. Yazdani^b, M.L. Reedy^a, S.E. Kaminsky^a, J.L. Berry^b and P.P. Morris^a

^a Division of Radiologic Sciences, Department of Radiology, Wake Forest University School of Medicine, Winston-Salem, NC
^b Department of Biomedical Engineering, Wake Forest University School of Medicine, Winston-Salem, NC

Please address correspondence to P. Pearse Morris, MB, BCh, Division of Radiologic Sciences, Department of Radiology, Wake Forest University School of Medicine, 2nd Floor, Meads Hall, Medical Center Blvd, Winston-Salem, NC 27157; e-mail: pmorris{at}wfubmc.edu

BACKGROUND AND PURPOSE: Sacroplasty is not as routinely performed as vertebroplasty, possibly due to technical challenges and the paucity of data regarding subsequent outcomes. The first goal of the present investigation was to describe a technique for sacroplasty that facilitates safe needle placement and polymethylmethacrylate (PMMA) extrusion. The second goal was to perform finite element analysis (FEA) by using a geometric model of sacral fracture to identify mechanical outcomes of sacroplasty.

MATERIALS AND METHODS: Sacroplasty was performed on fresh pelvis specimens (n = 4) under biplane fluoroscopy. Cadavers were imaged via CT before and after sacroplasty and volume rendered to examine needle placement and PMMA extrusion. The volume-rendered CT data were then used to generate geometric models of the intact, fractured, and cement-augmented fractured sacrum for comparison by using FEA.

RESULTS: CT data demonstrate that safe injection needle placement and PMMA delivery may be facilitated by orienting the needle parallel to the L5-S1 interspace and ipsilateral sacroiliac joint, then targeting the superolateral sacral ala within an area bounded by a line lateral to the posterior foraminal openings and a line superimposed on the medial edge of the sacroiliac joint. FEA revealed that simulated sacroplasty decreased maximal principal stress at the point of sacral fracture propagation by 83% and fracture gap micromotion by 48%.

CONCLUSION: Sacral landmarks can be used to place PMMA safely where sacral fractures occur. FEA suggests that sacroplasty may decrease fracture-associated mechanical stress and micromotion, which may contribute to patient reports of decreased pain and increased mobility postsacroplasty.