Study design: Cadaver motion segments were used to evaluate the effects of vertebroplasty on spinal loading following vertebral fracture.
Objectives: To determine if vertebroplasty reverses fracture-induced changes in the distribution of compressive stress in cadaver motion segments.
Summary of background data: Vertebroplasty involves reinforcement of vertebrae by injection of cement and is now being used increasingly to treat osteoporotic vertebral fractures. However, its effects on spinal load-bearing are largely unknown. We hypothesize that vertebroplasty, following vertebral fracture, helps to equalize stress acting on the intervertebral disc and adjacent vertebral bodies.
Methods: Nineteen cadaver thoracolumbar motion segments (age 64-90 years) were induced to fracture by compressive overload. Specimens were then subjected to vertebroplasty, and subsequently creep loaded for 1 hour at 1.5 kN. The compressive stress acting on the intervertebral disc was measured before and after fracture, after vertebroplasty, and after creep, by pulling a pressure transducer mounted in a 1.3-mm needle across the disc's midsagittal diameter. This information was then used to calculate neural arch load-bearing. At each time point, measurements were also made of compressive stiffness.
Results: Vertebral fracture reduced motion segment compressive stiffness, decompressed the adjacent nucleus, increased stress concentrations in the posterior anulus, and increased neural arch load-bearing, all by a significant amount. Vertebroplasty partially, but significantly, reversed all of these fracture-induced changes.
Conclusions: Vertebroplasty reduces stress concentrations in the anulus and neural arch resulting in a more even distribution of compressive stress on the intervertebral disc and adjacent vertebral bodies.