… 2b represent the signal phase of even and odd k-space lines for each slice. Here, only the
slice center is considered (as the through-slice phase variation is unchanged from before). For …

… Using the speed of EPI, several signal averages can be employed to increase SNR and
baseline (low b-factor) and multiple high b-factor data sets of the volume can be acquired in only …

… images at different b values, illustrating good SNR and contrast in a single shot up to b = 10,500
… This was a conservative approach that account for the relatively modest b-values (b max …

Purpose To introduce the wave‐CAIPI (controlled aliasing in parallel imaging) acquisition
and reconstruction technique for highly accelerated 3D imaging with negligible g‐factor and …

… In turn, for a fixed b, the optimal vector, z, contains values z i with a modulus of 1 and phase
equal to that of A i b. By starting with a feasible pair, b and z, and then keeping one variable …

… In our procedure, the B 1 fields from all of the coils were added before the Bloch-equation
calculation was performed. We note that although at low flip angles, where Eq. [1] holds, this …

Purpose This article introduces a constrained imaging method based on low‐rank and
subspace modeling to improve the accuracy and speed of MR fingerprinting (MRF). Theory and …

… B, Assembled ex vivo placental dual perfusion chamber and coil array. C, Seven-channel …
B, 3D view of segmented fetal brains and livers in the corresponding discordant twin pair [red …

… eg high b values) theoretically provides exceptional angular resolutions of fiber pathways …
8 Augustinack, JC, van der Kouwe AJ, Fischl B. 2013. Medial temporal cortices in ex vivo …

… b) PRESS is prone to localization errors at high fields (≥ 3 T) that compromise accurate …
The B 1 + variation in the phantom as measured by a B 1 + mapping sequence was similar …