Dislocations are ubiquitous linear defects and are responsible for many of the properties of
crystalline materials. Studies on the glide process of dislocations in bulk materials have …

We fabricated pn-junction diodes by thermal diffusion of Ag acceptor into n-type melt-grown
Mg 2 Si single-crystalline substrates (electron concentration=2×10 15 cm −3 ) to investigate …

A concrete-filled steel tube (CFT) column system has many advantages compared with
ordinary steel or reinforced concrete system. One of the main advantages is the interaction …

… ; and a 0 = ε 0 (m 0 /m * )a H , where a H (0.53 Å) is the Bohr radius of a hydrogen atom, ε
0 is the static dielectric constant, m 0 is the free-eletron mass, and m * is the effective mass. If …

… Amberite™ XAD-7 HP bead was washed with 2 M HNO 3 and acetone successively, and …
, respectively; m stands for mass of dry resin; and V represents volume of aqueous phase. …

… m = 0, ±1 and ±2 for the l = 2 mode, νt [Hz] is the translation frequency of center of gravity, g
[m·s–2] is the gravitational acceleration and R0 [m… frequencies for m = ±1 and ±2 split into two …

… text, we also performed identical simulations with M scl replaced by the VMC law (5). As the
glide mobility M gl is much greater than the climb mobility M scl we split the integration of (6), …

… O R T D O Δ μ O + − t e M R T D Δ M μ M Δ t x where Δx is the thickness, t eO(M) is the ionic
transport number, D O(M) is the diffusion constant, Δμ O(M) is the chemical potential, x is the …

… eluted with 0.15M HCl. The optimum conditions for separation at the room temperature are
as follows: a resin bed with a height of 180mm and diameter of 25mm; 1800mL of 0.15M HCl …

… gel supplemented with 6 M urea, dried and exposed onto radiographic films. … , Gloghini
A, Pivetta B, Gasparotto D, Carbone A, Boiocchi M. 2000. Sequence analysis of the …